Grizzly G0925 Owner's Manual page 2

Revised Inventory List
Box 1 (Figure 1)
K. Pointer ........................................................ 1
L. Threaded Depth Rod Assembly ................. 1
M. Chuck Guard Assembly ............................. 1
N. Chuck Guard Seat Assembly ..................... 1
K
M
L
Figure 1. Box 1 additions.
Revised Assembly Steps
Perform Steps 1–4 of Assembly on Page 15 of
owner's manual. Then follow the steps below to
complete the assembly process.
5.
Remove (2) pre-installed tap screws, Phillips
head screw, and hex nut (see Figure 2) from
chuck guard seat.
Tap Screws
Hex Nut
Figure 2. Location of chuck guard seat screws.
-2-
Qty
N
Phillips Head
Screw
6.
Attach chuck guard to chuck guard seat
using fasteners removed in Step 5 (see
Figure 4).
Figure 3. Aligning chuck guard to chuck guard
seat.
Figure 4. Attaching chuck guard to chuck guard
seat.
Model G0925 (Mfd. Since 2/20)