Explanation Of Symbols - Barco MDSC-8231 User Manual

Important information
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the MDSC-8231 as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection form structures, object and people.

7.7 Explanation of symbols

Symbols on the device
On the device or power supply, you may find the following symbols (nonrestrictive list):
E346057
E346057
E346057
4: For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be
estimated using the equation applicable to the frequency of the transmitter. Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
56 R5911692 /01 MDSC-8231
Separation distance according to frequency of transmitter
4
150kHz to 80MHz
d=1.2√P
0.12
0.38
1.2
3.8
12
Indicates the device meets the requirements of the applicable EC directives/
regulations.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B).
Indicates the device is approved according to the UL Recognition regulations.
MEDICAL – GENERAL MEDICAL EQUIPMENT
AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH ANSI/AAMI AS60601-1:2005/(R)2012, CSA CAN/CSA-C22.2
NO. 60601-1:14
Indicates the device is approved according to the UL regulations for Canada and US.
Indicates the device is approved according to the UL Demko regulations.
Indicates the device is approved according to the CCC regulations.
80MHz to 800MHz
d=1.2√P
0.12
0.38
1.2
3.8
12
800MHz to 2.5GHz
d=2.3√P
0.23
0.73
2.3
7.3
23