Table of Contents
Advertisement
Advanced operation
3.
Enter the SDI config submenu.
4.
Select one of the available SDI config modes and confirm.
SDI loopthrough (not available in Quad link)
SDI 2: loopthrough of SDI 1
SDI 4: loopthrough of SDI 3
5.3.5 Auto search
About auto search
By enabling the input selection auto search function, the display will automatically detect the connected
source and display it on the screen.
To enable/disable auto search
1.
Bring up the OSD main menu.
2.
Navigate to the Input Select menu.
3.
Enter the Auto search submenu.
4.
Enable/Disable auto search as desired and confirm.
5.3.6 Failover input
About failover input
This function allows the display to automatically switch to a failover (backup) source in case the main source
(DisplayPort, HDMI, SDI 4K) is missing. The display will automatically restore the main source once the signal
is back.
The available failover inputs for your display depend on the selected SDI configuration mode. See the
following table for more details.
Main source
DP / HDMI / SDI 1
DP / HDMI / SDI 1 / SDI 3 (*2)
DP / HDMI / QUAD LINK 3G-SDI (*3)
The failover input can only be selected when both
1. the Auto search function is disabled (see "Auto search", page 36), and
2. the PiP/PaP Modes function is disabled (see "Picture and Picture input", page 37 and "Picture in
Picture input", page 38).
If any of both functions are enabled then failover will be disabled and made unavailable. As soon as
both functions are disabled again, failover will be enabled and made available again with the
selected failover input.
The failover input will be activated within about 7 seconds after the main source has been lost.
During the transition from main to failover input and vice versa, a text message is visible to inform
the user.
The main source can be changed while the failover input remains unchanged. During the selection
and synchronization of a new main source the failover function is temporary (7 sec) disabled.
36
R5911692 /01
MDSC-8231
Backup source
•
None
•
DVI
•
SDI 3 (*1)
•
None
•
DVI
•
None
•
DVI
Advertisement
Table of Contents
Troubleshooting
