Power Fist 8623159 User Manual page 8

8623159
5. Clean the V-blocks (15, 19, 31, and 32).
6. Lubricate the surface between the jaws and V-blocks.
7. Reassemble the tool.
8. Replace the jaws. Be sure that you place the large jaw opposite the small
jaw. Then replace the V-blocks.
9. When not in use for an extended time, lightly oil the jaws to
prevent corrosion.
NOTICE: Remember to clean the jaws after every job.
NOTE: Do not use solvents to clean the unit.
LUBRICATION
Use a light machine oil on moving parts. Oil on a regular basis to reduce friction
and maintain smooth movement.
NOTICE! NEVER use a penetrating oil to lubricate the tool. Penetrating oil
may act as a solvent that can break down the grease and cause the tool to
seize up.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
8
Metal Shrinker and Stretcher
For technical questions call 1-800-665-8685
V 4.0