Advertisement
PARTS REQUIRED:
BEGIN
1
Mount barrel bolt flush at top of OO on left door using 3/4" screws as shown (Fig A).
2
With door closed mark hole location for bolt to extend into.
HINT: Extend bolt to leave a mark in wood. Tap bolt with hammer. Drill 3/8" hole
deep enough for bolt to slide into.
Install hasp on right door and latch on left door. Bottom edge of hasp is
3
35-1/2" (90 cm) up from bottom edge of door trim. Measure and mark locations and
install with 3/4" screws as shown (Fig B).
FINISH
4
You have finished mounting your door hardware.
DOOR HARDWARE
x1
x1
x4
3/4" (1,9 cm)
12"
(30,5 cm)
35-1/2"
(90 cm)
x7
3/4" (1,9 cm)
HINT: With door closed extend bolt and
tap with hammer to leave a mark in wood
for drilling.
48
3/8" (9 mm) Drill Bit
Drill 3/8" hole
in-line with bolt.
Flush on OO.
OO
Fig. A
3/4" (1,9 cm) Screw x7
Install on right door
Fig. B
Advertisement
