Advertisement
x4
x32
2" (5 cm)
BEGIN
Stand front wall on floor.
It is important to secure the front wall in the following order.
1
Center front wall on floor side-to-side.
Nail the front wall flush to the floor
using 2" nails 6" apart. Angle nails
to hit floor frame (Fig. A).
Nail the lower side wall corner to the
front wall trim with one 2" nail (Fig. B).
Be sure the measurement between the panel
2
edge and the trim is the same along the entire
length. Then secure with one 2" nail in the upper
corner (Fig. C).
Nail along the panel edge into the trim using 2"
nails spaced 6" apart.
FINISH
3
Secure the LN into floor using three 3" nails
(Fig. E).
Screw through the front wall trim into the top
plate and into LN using 3" screws (Fig. D, E).
Repeat process to secure the right side of
the front wall.
FRONT WALL INSTALLATION
3" (7,6 cm)
Fig. B
x6
Trim
6"
2" (5
(15 cm)
cm) Nail
CENTER
6"
(15 cm)
34
3" (7,6 cm)
Fig. A
6"
(15 cm)
2" (5 cm)
Nail
Same
Side
Measurement
Panel
2" (5 cm)
Nail
Fig. D
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
Fig. E
2" (5
cm) Nail
Fig. C
Trim
2 x 3"
3" (7,6 cm)
Screw
3" (7,6 cm)
Nails
LG
Advertisement
