Advertisement
Before attaching floor decking, it is important to level and square the floor frame.
A level and square floor frame is required to correctly construct your shed.
BEGIN
1
See page 8 for the preferred floor leveling method.
2
Use level and check the frame is level before applying floor panels.
Check for frame squareness by measuring diagonally across corners. If the
3
measurements are the same, the frame is square. The diagonal measurement
will be approximately 151" (385,5 cm).
4
When the frame is level and square secure one side of frame to the 4x4 runners
using one fastener at ends of each runner. At the opposite end of the frame,
secure the frame to 4x4 runners with one fastener at ends of each runner making
sure the frame remains square (Fig. A).
FINISH
5
Once the floor frame is level and square fasten the frame at each point the frame
contacts the 4x4 runners.
First, secure at ends
FLOOR FRAME
LEVEL AND SQUARE FLOOR FRAME
with one fastener
151"
(385,5 cm)
151"
(385,5 cm)
Fig. A
11
Second, secure at ends
with one fastener
Advertisement
