Advertisement
x12
x70
BEGIN
Stand right side wall on floor.
It is important to secure the side wall in the following order.
1
Center side wall on floor front to back.
Nail the lower side wall corner to the
back wall trim with one 2" nail (Fig. A).
2
Be sure the measurement between the
panel edge and the trim is the same
along the entire length. Then secure
with one 2" nail in the upper corner
(Fig. B).
Nail along the panel edge into the trim
using 2" nails spaced 6" apart.
Nail along bottom of panel using 2"
nails 6" apart. Angle nail to hit floor
frame (Fig. C).
FINISH
Secure LN into floor using three 3" nails (Fig. E).
3
Secure the wall frames bottom plate onto floor
using two 3" nails between studs.
Screw through the back wall trim into the
top plate and LN using 3" screws (Fig. D, E).
Remove temporary brace.
Repeat process to secure the left side wall.
SIDE WALLS INSTALLATION
3" (7,6 cm)
2" (5 cm)
DOOR
x4
CENTER
D O
O R
6"
(15 cm)
Fig. C
D O
O R
3" (7,6 cm)
Nail
33
3" (7,6 cm)
2" (5 cm)
Nail
Fig. A
2" (5 cm)
Nail
Same
Panel
Measurement
Fig. B
6" (15 cm)
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Nails
3" (7,6 cm)
Screw
Fig. E
Trim
Trim
2x3"
LN
Advertisement
