Advertisement
PARTS REQUIRED:
x8
RAFTER-HALF
x1
OO
2 x 3 x 69" (5 x 7,6 x 175,3 cm) TEMPORARY SUPPORT
BEGIN
You will build FOUR assemblies;
1
Place two rafter-halves in the corner of back and side walls. The
RED ENDS identify the ends to be connected at the center.
Apply glue to rafters where the gusset will fit.
2
RED ENDS of Rafters must touch together at the peak. Nail gusset to rafters using twelve 2"
3
nails in pattern shown.
4
Flip over rafter assembly and repeat STEPS 2-3 to attach second gusset to other side.
5
Repeat STEPS 1-4 to build THREE additional rafter assemblies.
FINISH
6
You have finished assembling
your rafters.
Pre-assembled
Fit base of rafters in corners
Temporary support (OO
GUSSET
Glue
Glue
RAFTERS
GUSSET
x8
Use floor and walls to help
assemble rafters!
96"
(244 cm)
of back wall.
)
RED ENDS TOGETHER
RED ENDS TOGETHER
1/4" gap (6 mm)
x2
Center
35
x96
2" (5 cm)
HINT:
2" (5 cm)
Advertisement
