Replacing Hydraulic Oil Filter - Kioti L3503 Owner's Manual

6
L3503 / LK45
-1
RePlacinG hYDRaUlic Oil
FilteR
(1) Hydraulic Oil Filter
caUtiOn
To avoid personal injury:
Be sure to stop the engine be-

fore changing oil filter cartridge.
1. Remove the oil filter.
2. Place a film of clean transmission
fluid of the rubber seal of the new
filter.
3. Tighten the filter firmly until it con-
tacts the mounting surface. Then
tighten the filter, by hand, an addi-
tional half turn only.
L3503_LK45-호주향-06.indd 14
621Oa11a
(1) Level Gauge
(A) Oil level is Acceptable Within this Range.
iMPORtant
To prevent serious damage to

the hydraulic system, use only
a genuine KIOTI filter.
4. After the new filter is in place , fill
the transmission up with oil to the
upper line of the oil gauge.
5. After running the engine for a few
minutes, stop it and check the
oil level again, add oil to the pre-
scribed level.
6. Make sure that the transmission
fluid doesn't leak through the seal.
621Oa12a
(2) Oil Filling Plug
2008-12-18 오후 1:53:19