Safety Information - Nokia 7368 Product Manual

7368 ISAM ONT G-240W-J Product Guide
•
•
•
•

6.5 Safety information

Read the following safety information before installing the unit.
power circuits.
Note 2 —
Issue: 01
voltmeter or multimeter
optical power meter
drill and drill bits
paper clip
Hazardous electrical voltages and currents can cause
Danger 1 —
serious physical harm or death. Always use insulated tools and
follow proper safety precautions when connecting or disconnecting
Danger 2 —
have no live voltages present on feed lines or terminals. Use
a voltmeter to measure for voltage before proceeding.
Danger 3 —
the enclosure to the utilities.
This equipment is ESD sensitive. Proper ESD
Warning —
protections should be used when removing the fiber access cover
of the indoor ONT.
Keep indoor ONTs out of direct sunlight. Prolonged exposure
Caution —
to direct sunlight can damage the unit.
Observe the local and national laws and regulations that
Note 1 —
may be applicable to this installation.
Observe the following:
•
The indoor ONT should be installed in accordance with the
applicable requirements of the NEC or CEC. Local authorities
and practices take precedent when there is conflict between the
local standard and the NEC or CEC.
•
The indoor ONT must be installed by qualified service personnel.
•
Indoor ONTs must be installed with cables that are suitably rated
and listed for indoor use.
3FE-48009-AAAA-TCZZA
Make sure all sources of power are turned off and
Always contact the local utility company before connecting
Install a G-240W-J indoor ONT
63