Resistibility Requirements Compliance; Electrical Safety Guidelines - Nokia 7368 Product Manual

ANSI CPE safety guidelines
This device complies with Part 15 of the FCC Rules. Operation is subject to the
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that
2.2.5
The customer premises equipment complies with the requirements of ITU

2.3 Electrical safety guidelines

This section provides the electrical safety guidelines for the customer premises
G-240W-J devices are compliant with the following standards
•
•
20
in conjunction with any other antenna or transmitter. End-users and installers must
be provided with antenna installation instructions and consider removing the no-
collocation statement.
following two conditions:
may cause undesired operation.
Any changes or modifications not expressly approved
Caution —
by the party responsible for compliance could void the user's
authority to operate the equipment.

Resistibility requirements compliance

Recommendation K.21 for resistibility of telecommunication equipment installed in
customer premises to overvoltage and overcurrents.
equipment.
IEC-62368-1
UL-62368-1
The devices comply with the U.S. National Electrical
Note —
Code. However, local electrical authorities have jurisdiction when
there are differences between the local and U.S. standards.
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
Issue: 01