Table 23 Optics Module Status Parameters - Nokia 7368 Product Manual

Configure a G-240W-J indoor ONT
Table 23
2
3
Procedure 13
1
86
Optics module status parameters
Field
Laser Bias Current (ONT ANI-ONT-Side Optical
Measurements)
Optics Module Voltage (ONT ANI-ONT-Side Optical
Measurements)
Optics Module Temperature (ONT ANI-ONT-Side Optical
Measurements)
Rx Optics Signal Level at 1490 nm (ONT ANI-ONT-Side
Optical Measurements)
Tx Optics Signal Level at 1310 nm (ONT ANI-ONT-Side
Optical Measurements)
Lower (ONT ANI-ONT-Side Optical Measurements-Optical
Threshold)
Upper (ONT ANI-ONT-Side Optical Measurements-Optical
Threshold)
Click Refresh to update the displayed information.
STOP. This procedure is complete.
Statistics retrieval
Select Status > Statistics from the top-level menu in the GPON Home Gateway window.
Statistics are available for LAN ports, WAN ports, and WLAN ports.
Figure 25 shows the statistics for the LAN ports.
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
Description
Laser bias current, measured in uA
Optics module voltage, measured in V
Optics module temperature, measured in C
Received optics signal level at 1490 nm,
measured in dBm
Transmitted optics signal level at 1310 nm,
measured in dBm
Lower optical threshold, measured in dBm
Upper optical threshold, measured in dBm
Issue: 01