Nokia 7368 Product Manual page 99

7368 ISAM ONT G-240W-J Product Guide
1
2
3
Issue: 01
Connection Type Choose a connection type: IPoE or PPPoE
IP mode Choose an IP mode from the drop-down menu: IPv4 or IPv6
Enable/Disable Select this checkbox to enable the WAN connection
NAT Select this checkbox to enable NAT
Service Select the checkboxes to enable service types for this connection
Enable VLAN Select this checkbox to enable VLAN
VLAN ID Enter the VLAN ID
VLAN PRI Enter the VLAN PRI
WAN IP Mode Choose an IP mode from the drop-down menu
Connection Trigger Choose a connection trigger from the drop-down menu; for example, AlwaysOn
The Connection Trigger field is visible when the IP mode is set to IPv6 or
IPv4&IPv6.
Username Enter the username
Password Enter the password
Keep Alive Time Enter the Keep Alive Time (from 5 to 60 seconds)
Keep Alive Retry The number of keep alive time retires (1 to 10); this field cannot be modified in regular
user mode
Echo Value The echo value: the keep alive time value multiplied by the number of retries; this
field cannot be modified in regular user mode
Manual DNS If desired, enter a manual DNS
DHCPv6 Enable Select this checkbox to enable the DHCPv6 function on this WAN interface
Request Address Select this checkbox to enable the DHCPv6 option to request the Address from the
DHCPv6 Server
Request Prefix Select this checkbox to enable the DHCPv6 option to request the Prefix from the
DHCPv6 server
Request Option Enter the custom DHCPv6 option send to the DHCPv6 server
Auto Configured Enable Select this checkbox to enable the Auto Configuration function on this WAN
interface
Configure a specific WAN connection.
Click Save.
3FE-48009-AAAA-TCZZA
Configure a G-240W-J indoor ONT
99