7368 ISAM ONT G-240W-J Product Guide
Issue: 01
1
Select Network > US Classifier from the top-level menu in the GPON Home Gateway
window, and select the Policy tab, as shown in Figure 44.
All classifier policies are displayed in the policy table in the window.
Figure 44
US Classifier Policy window
Table
36
describes the fields in the US Classifier Policy window.
Table 36
US Classifier Policy parameters
Field
Tunnel Type
Tunnel Interface
VLAN ID
VLAN Tag
VLAN Priority
IP TOS/DSCP
Drop
3FE-48009-AAAA-TCZZA
Description
The tunnel type is set to GRE and cannot be modified.
Choose a tunnel interface from the drop-down menu: No Tunnel, GRE
Tunnel, or LAN traffic.
Enter a VLAN ID (0-4094).
This field is not configurable. The VLAN tag is set to 8100 (hexadecimal).
Enter a VLAN priority level (0 to 7). A lower number indicates a higher
priority.
This field is not configurable. All tunnel packets are generated with a
default DSCP value (usually 0).
Select this checkbox to drop the packets
Configure a G-240W-J indoor ONT
117