Replace a G-240W-J indoor ONT
7.6 Procedure
Use this procedure to replace a G-240W-J indoor ONT.
Deactivate the ONT services at the P-OLT.
1
If used, disable the Wi-Fi service by pressing the WLAN button; see Figure
2
Figure 17
G-240W-J indoor ONT connections
70
•
See the detailed specifications in the
for the ONT temperature ranges for these ONTs.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
Use the RTRV-ONT command to verify the ONT status and th associated services.
i
Record the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
If the ONT is in service, place the ONT in OOS state.
ii
Example:
ED-ONT::ONT-1-1-1-1-1;
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
G-240W-J unit data sheet
17
for the location of the WLAN button.
Issue: 01