Important Safety Information - Nokia 30 GSM User Manual

Nokia user's guide connectivity terminal nokia 30 gsm
Hide thumbs Also See for 30 GSM:
Table of Contents

Advertisement

IMPORTANT SAFETY INFORMATION

Power supply
The Nokia 30 GSM Connectivity Terminal power supply ACW-5A converts mains voltage to low voltage DC.
Note: The power supply socket should be easily accessible and it must not be covered. The power supply is
insulation class 2-covered.
Warning! Dangerous voltage. Do not attempt to open the casing.
Note: This power supply is for indoor use only! Do not expose the unit to water, rain or dust.
The power supply should be disconnected from the socket when the terminal is not in use for a prolonged period of
time or when the power supply is not connected to the terminal.
When you disconnect the power cord of the power supply, grasp and pull the plug, not the cord.
Important! Use only the power supply approved by Nokia. The use of any other types will incvalidate any approval
or warranty applying to the terminal, and may be dangerous.
Operating environment
Remember to follow any special regulations in force in any area and always switch off the terminal whenever it is
forbidden to use it, or when it may cause interference or danger.
The Nokia 30 GSM Connectivity Terminal is switched on when the power supply is connected to the terminal and to
an AC outlet. Do not connect the power supply whenever it is forbidden to use a wireless device, or when it may
cause interference or danger.
When connecting the terminal or any accessory to another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Copyright ©2002 Nokia. All rights reserved.
52

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

30

Table of Contents