G-240W-J unit data sheet
(1 of 2)
(2 of 2)
60
Call History Data collection (ONTCALLHST) is supported, except for the following parameters:
RTP packets (discarded), far-end RTCP and RTCP-XR participation, RTCP average and peak round trip delay,
MOS, average jitter, number of jitter-buffer over-runs and under runs.
Considerations and limitations
Some voice features are configurable on a per ONT basis, including Call Waiting, Call Hold, 3-Way Calling, and
Call Transfer.
The following voice features / GSIP parameters are configurable on a per-Client/ per-ONT basis (not per-
Subscriber):
•
Enable Caller ID and Enable Caller Name ID
•
Digitmap and the associated Interdigit and Critical timers and Enter key parameters
•
Warmline timer is enabled per subscriber, but the warmline timer value is configured per ONT and must
have a lower value than the Permanent time
•
Miscellaneous timers: Permanent, Timed-release, Reanswer, Error-tone, and CW-alert timers
•
Features / functions: Message waiting mode, WMWI refresh interval, DTMF volume level
•
Service Codes for the following features: CCW, Call Hold and Warmline
3FE-48009-AAAA-TCZZA
7368 ISAM ONT G-240W-J Product Guide
Issue: 01