Table of Contents
Advertisement
Figure 23. Slot 16 to 17 riser connectors
Table 18. Slot 16 to 17 riser connectors
Callout
PCIe3 x8 (Slot 16)
16
Storage interposer connectors
The following illustration shows the internal connectors on the interposer.
Note: Some cable connectors have locks or latches that must be disengaged to disconnect the cable.
For information about interposer cable routing, see "Cable routing for drives" on page 45.
Figure 24. Storage interposer connectors
Table 19. Storage interposer connectors
Callout
PCIe SAS interface from system board (PCIE) (SAS
1
only)
Drive power from system board (POWER)
2
Drive signal from system board (SIDEBAND)
3
Power for drive to backplane 1 or 6 (BP 1/6)
4
RAID card connectors
The following illustration shows the internal connectors on the RAID card.
There are two basic RAID card configurations.
Notes:
• The RAID cards in the illustration might be different than the RAID card in your system. Connector
locations for all RAID cards are similar.
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node
38
Callout
PCIe3 x8 (Slot 17)
17
Callout
Power for drive to backplane 2 or 5 (BP 2/5)
5
PCI connector to RAID card
6
Power for drive to backplane 3 or 4 (BP 3/4)
7
Advertisement
Table of Contents
