Table of Contents
Advertisement
Figure 96. Memory module locations
Complete the following steps to remove a memory module.
Watch the procedure. A video of the replacement process is available:
•
YouTube
•
Youku
Step 1.
Open the memory module connector retaining clips to extract the memory module; then, remove
the memory module.
If you are not replacing the memory module that you removed:
1. See
the Memory Population Reference
modules.
2. Install a memory module filler, that was originally provided with the PHM option, in any vacant memory
module connectors.
3. Install the upper system board or system board filler, if it was removed. See "Install a system board" on
page 111.
4. Install the compute tray where the system board is installed. See "Install a compute tray" on page 117.
User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node
174
for the required installation order of the remaining memory
Advertisement
Table of Contents
