Table of Contents
Advertisement
Separate, full-size insulated power and ground wires are required on all dedicated circuits. No
chained grounds are permitted.
permitted on isolated ground receptacles.
Power Cord Specifications
The appropriate cord set is supplied with each machine. For replacement cord sets, contact the
following suppliers:
North America
Manufacturer
Manufacturer's Part #
Description
Length
Cordage Rating
Plug
Océ Reference #
3
Europe
Manufacturer
Manufacturer's Part #
Description
Length
Cordage Rating
Océ Reference #
Power Outlet Specifications
The AC power outlet must be located such that no more than an 8 foot power cord is used to
connect to the printer. In North America, the outlet requires a matching 250 VAC 15 ampere
NEMA 6-15R receptacle.
Notes:
1
US customers: refer to National Electrical Code article 250-74, exception # 4.
2
These requirements do not supplant national, state or local codes. Check the applicable electrical codes to
ensure compliance.
3
The manufacturer of the European cordset is located in the United States. No international supplier has
been identified.
4
Outside North America, an approved plug and receptacle rated for at least 15 amps at 230 VAC must be
installed. The customer is responsible for providing a power conditioning device if the AC power does not
meet the above requirements due to such conditions as "brown outs" (<207 VAC) or voltage transients.
45572-I
see copyright, disclosure, use and duplication information on pg. iii
1
Use of the conduit as the equipment grounding conductor is not
2
Panel Components
98030200.10470.2
IEC 320 Power Cord Set
244 cm (8 feet)
14/3 AWG
250 VAC 15 Amperes NEMA 6-15P
37662
Panel Components
98010801.10074.2
IEC 320 Power Cord Set
244 cm (8 feet)
3 × 1.5 mm <HAR>
40889
4
System Requirements
2-7
Advertisement
Table of Contents
