Hallway Requirements - Oce LightJet 430 Site Preparation Manual

LightJet 430 site preparation guide

Hallway Requirements

Once uncrated, the LightJet
approximately 818 kg (1800 lb). To prevent collisions and/or damage, it is recommended that at
least two people move it. The equipment will roll most easily on level concrete or tile floors; this
should be considered when selecting the installation route and final location. The dimensions of
®
the LightJet 430 are shown in Figure 2-2.
the installation route.
To provide reasonable access around corners, the hallways and doorways must be a minimum of
213 cm (7') wide. If the approach from the hallway is straight through the doorway, the doorway
must be a minimum of 183 cm (6'). Figure 2-3 illustrates the hallway and access door sizes
required to move the LightJet
Notes:
1
When the media door is open, the printer is 224 cm (88") wide x 193 cm (76") long x 150 cm (59") deep.
2-2 see copyright, disclosure, use and duplication information on pg. iii
Shock Watch
Figure 2-1 LightJet
®
430 can be rolled on its own casters. The printer weighs
®
430 from the receiving dock to the darkroom.
®
430 shipping crate dimensions.
1
Figure 2-3 illustrates minimum size requirements for
45572-I