How To Update Evolve Units; Security Package - Bay-Tek PRIZE HUB Modular Service Manual

HOW TO UPDATE EVOLVE UNITS

The software for the new, white Evolve unit can be copied onto a USB
thumb stick drive, and the Evolve can be updated by inserting this USB
stick into the Evolve and pressing a button.
Instructions:
1.) While Evolve is powered on, insert the USB into
the USB slot on the top of the board.
2.) Press boot button.
3.) Wait and watch until the 3rd LED lights up on the
lower section on the board.
4.) Once all 3 LED's are on, unplug Evolve to remove
power, remove USB thumb drive, and power the
Evolve back on.
5.) Upon power up, the Evolve will show version #
on the screen.
Bay Tek offers a security hasp package for Prize Hub's back doors.
The hasps are mounted on each door with 1/4" bolts, washers and lock nuts.
The holes must be drilled out; there are markers to assist with placement.
A padlock (not included) can then be inserted into the holes,
securing the back doors more forcibly than with basic locks
alone.
The security package includes 3 sets of metal hasps.
To order: call our Parts & Service team and order part number AAKIT-PH-SECURITY.

SECURITY PACKAGE

81