Loading Advertisements; Ticket Menu - Bay-Tek PRIZE HUB Modular Service Manual

LOADING ADVERTISEMENTS

To load custom advertisements - Insert a USB stick with ad files into the
USB port shown, inside the front door of the Prize Hub.
A banner will show on screen showing "mounted"
Ad files should be an ideal size of 768 x 1087 , png format.
While in the Advertising Menu, touch the center image of the prize to
load an ad.
The screen will change to thumbnails of available ads from
the USB stick.
Touch the image to assign it.
To load more than one ad, press
Select NEXT Advertisement and repeat the process.
This will allow you to look through the 4 advertisements
Cycle through all 4 ads and set ad length to 0 seconds if not desired.
Ticket Receipt Type
Selectable Options:
Evolve Receipt - Used with Evolve Units.
Refer to "Location Setup Menu", "Evolve Menu"
Deltronics 14 digit ign bc
Deltronics 14 digit bc
Deltronics 16 digit bc
Deltronics 14 digit no check digit
Refer to "Deltronics Options" - it explains the options and when to use
which option.
Clear All Tickets
Press to clear all tickets that would be scanned in and showing on the
game attract screen.
Add +1 Tickets - Add +10,000 Tickets
Press to add tickets to the game attract screen. After exiting menu, these
tickets can be printed and given as comped tickets to players.
These comped tickets will be recorded in the history menu.
If a mistake is made adding tickets, press "Clear All Tickets" to reset to zero.
Reset Ticket Database
Caution - This will erase all stored in the database.
This will have to be pressed 9 more times to verify this action.
A reset database will not accept receipts printed by the Prize Hub that have not yet been redeemed.
(as in a player saving receipts)

TICKET MENU

20