How To Calibrate Touchscreen - Bay-Tek PRIZE HUB Modular Service Manual

HOW TO CALIBRATE TOUCHSCREEN

Software version 1.17.20 and above has a touchscreen calibration application.
If at any time, the touchscreen needs to be calibrated, plug in a USB keyboard to the USB
port and press the F9 key.
This screen will appear:
Important: Due to the nature of this program and monitor - do not touch the center of the target.
The screen will not calibrate correctly if the center of the target is touched.
The target should be touched on the lower right corner of the target as shown by the arrow:
Touch Here
There will be 4 different target locations to touch.
The screen will automatically go back to the Prize Hub program.
Test the touch by entering the menu and touching different icons.
(Press the F9 key again if more calibration is needed)
43