Honeywell Scanner Programming - Bay-Tek PRIZE HUB Modular Service Manual

HONEYWELL BARCODE SCANNER PROGRAMMING
If a failure were to occur that caused the scanner to become inoperable,
follow these steps to re-register the scanner.
Identify the brand of scanner included in your Prize Hub:
Honeywell Scanners have a silver surrounding case and have been used years ago.
The scanner will have to removed from mounting bracket to program.
Make a copy of this page and cut on the dotted lines.
Follow these instructions:
1. Press and hold the scanner button to scan barcode 1. You will hear a confirmation beep when
it scanned correctly, the white and blue LEDs on the scanner will blink alternately
2. Press and hold the scanner button to scan barcode 2. You will hear a confirmation beep when
it scanned correctly.
3. Press and hold the scanner button to scan barcode 3. You will hear a confirmation beep when
it scanned correctly.
4. Press and hold the scanner button to scan barcode 4. You will hear a confirmation beep when
it scanned correctly.
5. Press and hold the scanner button to scan barcode 5. You will hear a three beeps when it
scanned correctly, the white and blue LEDs will stop blinking.
CODE 1/5 CODE 2
CODE 3 CODE 4
45