Table of Contents
Advertisement
20 Checking dental unit details
20.5.4 GUI diagnostics
20.5.5 PlanID
20.5.6 Product registration
20.5.7 Peripherals
20.5.8 Dental unit model
20.6 Network settings
104
Planmeca Sovereign Classic
GUI Diagnostics shows the current hardware revision of the control panel
and also contains tools for finding possible errors in the touch display.
CAUTION
GUI diagnostics is only meant to be used by a qualified Planmeca service
technician.
Details tab you can view details on the tag ID and the PlanID reader's
In the
region of operation. To change the region, contact your Planmeca dealer.
To enable/disable PlanID sounds, press Sound. A grey button means that
sounds are disabled and a blue button that they are enabled.
To enable/disable notifications about unknown PlanID tags, press ID. A grey
button means that notifications are disabled and a blue button that they are
enabled.
CAUTION
Configuration tab contains tools for enabling/disabling the PlanID reader
The
as well as for adjusting its power level, and is only meant to be used by a
qualified Planmeca service technician.
For instructions on how to register your dental unit, see section "Registering
your product" on page 5.
Peripherals contains information on and service tools for:
•
Solanna operating light
•
Capacitive patient sensor (Capsense)
CAUTION
Peripherals is only meant to be used by a qualified Planmeca service
technician.
Dental unit model shows the model of your dental unit.
About this unit shows the dental unit's IP address next to
The front page of
Network settings . Press > to display the dental unit's network settings.
Romexis tab to view network settings related to the Planmeca
Press the
Romexis connection.
The following network settings are displayed:
•
Romexis connection
•
Name of dental unit
User's manual
Advertisement
Table of Contents
