Page 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/pr Desk M o ducts/stand v102f Tool Monito s Requir Desk M e d: STAND-...
Page 2
Assembl Monito y Steps Steps Step 3 Step 1 Install swivel arms (B) and cable clip (E) to pole (D). Fasten the bolt with the supplied 6mm Allen key (J). Install pole cap (K) to top of pole (D). Step 2 Assemble pole (D) to base (C) with bolts (H) using 4mm Allen key (I).
Page 3
Step 5 Step 7 Store the Allen keys in cable clip (E) for future use. Slide the monitors onto the heads of swivel arms (B). Install thumb screws (F) using bolts (G). Make sure the screws are installed before you rotate the monitors. If needed, adjust the bolt on the side of the hinge behind the VESA plate to tighten or loosen the tilt angle using 6mm Allen key (J).
Page 4
Call: 1-800-371-5654 If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 05/01/18...
Need help?
Do you have a question about the STAND-V102F and is the answer not in the manual?
Questions and answers