Other Foot Plates And Footrest - Invacare Rea Dahlia 30 User Manual

Swinging calf pad and adjustments
• Swinging calf pad forwards (1) or backwards (2) :
1. Swing calf pad E forwards (1).
2. Pull up the calf pad E and swing it backwards (2).
• Adjusting height of calf pad:
1. Loosen knob C.
2. Adjust to the desired height and firmly tighten the
knob.
• Adjusting depth of calf pad
The calf pad has four depth adjustment options:
1. Remove the fixing screw F with 5 mm Allen key.
2. Adjust to one of the four positions and firmly
tighten the fixing screw F (3–5 Nm).
Adjusting foot plate
There are three different fold-up foot plates available.
• Standard height-adjustable foot plates:
1. Loose the fixing screw B with 5 mm Allen key.
2. Adjust the height and let the screw catch one of
the recesses on the foot plate tube.
3. Tighten the fixing screw B (3–5 Nm) in the desired
position.
The distance between the lowest part of the
footrest and the ground must be at least 50 mm.
• Depth-, Angle- (1) and Width- (2) adjustable foot plates:
1. Loosen the fixing screw G or H with 5 mm Allen
key.
2. Adjust the depth and angle positions and firmly
tighten the fixing screw G (12 Nm) or H (8–9 Nm)
in the desired position.
1572307-J
• Width-adjustable foot plates (2):
1. Loosen the two fixing screws I with 5 mm Allen
key.
2. Adjust the width position and firmly tighten the two
fixing screws I (3–5 Nm) in the desired position.
Invacare recommends that foot plate adjustment is carried
out by a qualified technician.
To ensure a good position of the feet, two types
of straps can be provided; the heel strap J (serial)
and the calf strap (optional) attached to the leg rest
support. Both adjustable by hook and loop fasteners.

3.8.3 Other foot plates and footrest

Adjusting the one-piece footrest
WARNING!
Risk of trapping fingers
The fingers might get trapped between the foot
plate and the foot plate attachment.
– Be careful not to trap your fingers between the
foot plate and the foot plate attachment when
folding it down.
A
1. Adjust the angle and the depth by loosening the two
screws A at the foot plate attachment.
Tool: 5 mm allen key
2. Adjust the foot plate to the correct position.
3. Re-tighten the screws with 10 Nm.
The foot plate can be flipped up. Lift the foot plate
B upwards as shown on the picture above.
Do not place anything on the foot plate when the
screws are loose.
Product Overview
B
17