Invacare Rea Dahlia 30 User Manual page 12

Rea® Dahlia® 30 / 45
1. Press the tilt handle A under the armrest pad, the seat
tilts automatically.
2. To raise the backrest upwards and return to a neutral
position, press the tilt handle A. Press the forearms
against the armrest pad when raising the seat and
backrest.
3. When using the user operated tilt with detachable
armrests, lean forward when returning to a neutral
position.
When using the user operated tilt with
detachable armrests, more strength is needed to
raise the backrest as the armrest pole cannot
be used as a help.
To return to a neutral position, move the feet a bit
forward while raising from the tilted position.
Locking the tilt and/or backrest angle adjustment
A
B
The locking device A allows you to set the tilting of the seat
unit and/or the angling of the backrest to a fixed position.
1. Tilt and/or angle the seat and backrest to the desired
position.
2. Insert the locking device A.
The position is now set and cannot be changed.
To remove the locking device, press on the plastic peg B
with a small object and pull outwards.
Electric tilt and backrest angle adjustment
WARNING!
Risk of injury
If the wheelchair is used by confused or restless
users or users with spasms:
– either lock the hand control functions
– or make sure that the hand control is out of
reach for the user.
WARNING!
Risk of injury
When tilting the wheelchair, parts of the body
can be squeezed between the armrest base and
the rearwheel.
– Make sure that the distance between the
armrest base and the rearwheel is always 25
mm or more.
12
CAUTION!
Risk of damage to the product
– Make sure that the hand control is not
unintentionally activated.
– Do not let children play with the hand control.
– If anything unusual is observed, such as unusual
sounds or uneven running during operation,
shut down the system.
Risk of malfunction
– Work on the hand control or other electric
parts (motors etc.) should only be carried out
by a qualified technician.
When activating the On/Off button, a short "beep" confirms
that the hand control is activated. The hand control is active
in 30 seconds after the last action, before it is automatically
deactivated.
The hand control can also be manually deactivated
by pressing the On/Off button.
The force needed to press the buttons on the hand
control is 5 Nm (finger power).
Symbols on the hand control
Battery and charging indicator
Locking function
On/Off
Backrest recline (yellow color on arrow and
backrest)
Seat tilt (green color on arrow, backrest
and seat)
Up/Down (yellow color for the backrest
recline, green color for the seat tilt)
Locking of recline and tilt function
A
C
1. Press on the locking key A.
2. Keep pressing on the locking key.
3. Simultaneously press on the chosen function B for the
seat tilt (green) or C for the backrest angle (yellow).
4. Repeat the procedure to unlock the function.
B
1572307-J