Rea® Dahlia® 30 / 45
3.7.3 Adjusting the seat cushion
The seat cushion A is secured with hook and loop straps
B on the seat plate.
WARNING!
Risk of seat cushion sliding
– Make sure that the hook and loop straps are
pressed firmly together and make sure that
they stay fixated.
3.8 Leg rests
WARNING!
Risk of injury
– Never lift the wheelchair by the footrest
supports or leg rests.
CAUTION!
Risk of pinching or crushing fingers
There are swing mechanisms where you could
trap your fingers.
– Be careful when using, swinging, disassembling
or adjusting these mechanisms.
IMPORTANT!
Risk of damage to the leg rest mechanism
– Do not place anything heavy, or let children sit
on the leg rest.
3.8.1 Swing away leg rests
Swinging outwards
1. Activate the release lever A and swing the leg rests
to the outside.
16
A
B
Swinging forwards
1. Swing the leg rest forwards until it engages.
Unhinging
1. Activate the release lever A.
2. Pull the leg rest upwards.
Hinging
1. Hinge the leg rest on the front of the frame and swing it
forwards until it engages.
3.8.2 Swing away, angle adjustable leg rests
Swinging outwards
1. Activate the release lever A and swing the leg rests
outwards.
Swinging forwards
1. Swing the leg rest forwards until it engages.
Unhinging
1. Activate the release lever A, swing the leg rest outwards.
2. Pull the leg rest upwards.
Hinging
1. Push the leg rest down into its receiver and swing it
forwards until it engages.
Adjusting angle
There are six preset positions available for angle adjustment.
1. Rotate the knob D with one hand while supporting the
leg rest with your other hand.
2. When a suitable angle is obtained, let go off the knob
and the leg rest will lock into the desired position.
1572307-J