Maximum Weight Of Removable Parts; Tyres - Invacare Rea Dahlia 30 User Manual

Rea® Dahlia® 30 / 45
515 mm (20")/560mm
(22")/600 mm (24")
Front location of
armrest structure
Handrim
diameter
Horizontal
location of axle
Minimum turning
radius
Overall length
without legrest
Overall height
Pivot width minimum 1280 mm
Maximum slope
angle brake
* Overall weight in seat width 39 cm and with lightest configuration. With "Laguna 2" backrest plate and cushion. If
fitted with electrical system, the weight increase is 4.2 kg.
Width of the
wheels
Wheel
inclination
11.3 Maximum weight of removable
parts

Maximum weight of removable parts

Part:
Leg rest angle adjustable
with calf pad and footrest
Armrest
Rear wheel 600 mm (24")
solid with handrim and
spoke guard
Headrest / Neckrest / Cheek
support
Trunk support
Backrest cushion
Seat cushion
Table tray

11.4 Tyres

The ideal pressure depends on the tyre type:
The table below is an indication. In case the tyre differs
from the list below, check the side of the tyre, the maximum
pressure is listed there.
50
DAHLIA 30°
465–550 mm
445–535 mm
-5.7/-94.3 mm
755 mm
830–960 mm
825–1250 mm
minimum 1280 mm
7°
515 mm (20")
35 mm (1 3/8")
Maximum weight:
3,2 kg
2,0 kg
2,5 kg
1,4 kg
0,8 kg
2,0 kg
1,9 kg
3,9 kg
405 mm (16") 515 mm (20")/560mm
(22")/600 mm (24")
465–550 mm
N/A
-5.7/-94.3 mm
755 mm
830–960 mm
825–1250 mm
minimum 1280 mm
7°
560 mm (22")
25 mm (1") - 35 25 mm (1") - 35 mm
mm (1 3/8")
0° +/- 1° (Wheelchair without load)
Tyre
Pneumatic profiled tyre:
515 mm (20"); 560 mm
(22");
610 mm (24")
Pneumatic low profile tyre:
560 mm (22"); 610 mm
(24")
Solid tyre:
405 mm (16"); 560 mm
(22");
610 mm (24")
Solid tyre:
100 mm (4"); 125 mm (5");
140 mm (5" 1/2); 150 mm
(6");
200 mm (8")
Pneumatic tyre:
200 mm (8")
The compatibility of the tyres listed above depends
on the configuration and/or model of your wheelchair.
The size of the tyre is mentioned on the sidewall of
the tyre. The change of appropriate tyres must be
carried out by a qualified technician.
In case of a tyre puncture consult a suitable workshop
(e.g. bike repair shop, bicycle dealer ...) to have the
tube replaced by a skilled person.
DAHLIA 45°
465–550 mm
445–535 mm
-5.7/-94.3 mm
755 mm
830–1000 mm
825–1250 mm
minimum 1280 mm
7°
600 mm (24")
(1 3/8")
Max. pressure
4.5 bar 450 kPa
7.5 bar 750 kPa
-
-
2.5 bar 250 kPa
405 mm (16")
465–550 mm
N/A
-5.7/-94.3 mm
755 mm
830–980 mm
825–1250 mm
7°
405 mm (16")
45 mm (1 3/4")
65 psi
110 psi
- -
- -
36 psi
1572307-J