3. Ensure that the two hook surfaces (pads and back cover)
are set correctly.
4. Put the backrest cover A back in place.
4.6.2 Using wedges with lateral positioning pad
A
1. Attach the wedges on the self-gripping pad A.
2. Assemble the lateral positioning pads on the backrest.
See section: "Using lateral positioning pads".
4.7 Adjusting the drip stand
WARNING!
Risk of tipping / injury
– Max. load on the drip stand: 4 kg (2 x 2 kg)
The rod of the drip stand must always be placed in
a vertical position, i.e. in a 90 degree angle to the
ground, no matter the position of the backrest or
the wheelchair.
1572307-J
A
Height
A
1. Loosen the lever A.
2. Adjust the drip stand to the desired height.
3. Firmly tighten the lever A.
Angle
A
1. Loosen the lever A.
2. Adjust to the desired angle.
3. Firmly tighten the lever A.
4.8 Tilt scale
A
A = Tilt scale backrest
The tilt scale option shows how many degrees the seat unit
is tilted and/or how many degrees the backrest is reclined.
Options
B = Tilt scale seat
23