Opening The Floor-Standing Model - Fujitsu PRIMERGY TX600 S3 Service Supplement Manual

Opening/closing the server Replacement routines
4.2.2

Opening the floor-standing model

4
5
3
1
3
2
Figure 6: Opening the floor-standing model
Ê Unlock the housing door (1).
Ê Open the housing door (2).
Ê Undo the two captive screws on the front panel of the server (3).
Ê Push the housing cover back a few centimeters (4) and take it off (5).
To close the floor-standing model, perform the above procedure in reverse.
24 Service Supplement TX600 S3