Opening The Casing - Fujitsu FUTRO S940 Operating Manual

Opening the casing

Device, Casing,
► Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
Open the casing carefully because there are WLAN cables that lead from the casing
cover to the system and these may break if the casing is opened carelessly.
► Remove any connected wires which are in the way.
1
1
► Loosen the screws at the rear (1).
► Slide the casing cover in the direction of the arrow (2) and swing out the
casing cover towards the front (3).
Fujitsu
"Important notes", Page
2
3
System expansions
11.
2
31