Fujitsu PRIMERGY TX600 S3 Service Supplement Manual page 28

Replacing the LocalView module
Ê Press the engagement lock (see (B) in
LocalView module and pull it out with its connection cable.
Installing the LocalView module
Ê Plug the connection cable (4-pin I
Ê Thread the connection cable of the LocalView module through the opening
for mounting the module and connect it to the corresponding connectors on
the SCSI backplane and the chassis ID module.
Ê Push the LocalView module into its bay until it engages.
Ê Reinstall and connect the CD/DVD drive.
This completes the replacement of the LocalView module.
28
2
C bus cable) onto the LocalView module.
Service Supplement TX600 S3
Replacement routines
figure 10) on the frame of the