Fujitsu PRIMERGY TX600 S3 Service Supplement Manual page 39

Replacement routines
Figure 22: Connecting the cables to the SCSI backplane
Ê First connect the cables to be connected to the bottom area (A) of the SCSI
backplane (see also
through the - still empty - bay for the accessible drives.
Ê Connect all the other cables to the SCSI backplane.
Ê Reconnect the tape drives, if applicable.
Ê Push the tape drives or their frames into the bays until they engage.
Ê Push the hard disk modules back in and lock them.
This completes the replacement of the SCSI backplane.
"Cable plans" on page
Service Supplement TX600 S3
Replacing the SCSI backplane
A
53). To do this, you can grip
39