Vfo Search; Search Skip Frequency - Uniden SC200 Operating Manual

4.
Enter the higher limit of your search range.
5.
Press
6.
Press
limits.
Using the Limit Search
1.
Press
2.
Press
appears on the display.)

VFO Search

You can search by using the VFO control.
1.
In Manual mode, enter the frequency by using the
number keypad and turn VFO control.
-- OR --
In Band Search Hold or Limit Search Hold, enter the
frequency by using the number keypad, and turn the VFO
control.
" V " appears on the display.
2.
Turn the VFO control clockwise to move up the
frequency step, and turn the VFO control counter-
clockwise to move down the frequency step.
3.
When you wish to store frequency or change the
channel, you need not press

Search Skip Frequency

The scanner may stop at certain frequencies during
Search that you do not want to hear. You can program
up to 50 Skip Frequencies into the SportCat. When the
scanner stops at one of these frequencies during
Search, press
and will be skipped during any Search. The scanner will
then search to find other active frequencies. If you enter
the 51st frequency, the 1st one is overwritten.
.
/ BAND to begin the search between the two
/ BAND to enter Limit Search mode.
or to stop searching. ("HOLD"
. That frequency is now "memorized"
first.
28