Changing A Ctcss/Cdcss Tone - Uniden SC200 Operating Manual

If you want to program tones for several frequencies during
your search, follow these steps:
After you program a frequency and a CTCSS
n
tone or CDCSS tone into a channel, the Search
Mode is changed to Search Hold Mode. To
activate the Search Mode press
If you decide to cancel the CTCSS Tone Search
n
Mode or CDCSS Tone Search Mode while you
are searching for frequencies, press and hold
until you hear two short beeps and the CTCSS
indicator or DCS indicator turns off.

Changing a CTCSS/CDCSS Tone

1.
Press
2.
Select the channel you want to change.
3.
Press
4.
Enter the new CTCSS tone or CDCSS tone using VFO
control,
If you make a mistake while using your keypad, press
and enter the tone again.
to activate the Subaudible Tone function.
.
or
Change per 1sec.
.
35
/BAND .