Setup; Installing The Battery Pack - Uniden SC200 Operating Manual

The SportCat comes with a rechargeable Nickel-Cadmium
Battery Pack. When fully charged, this Battery Pack will
supply up to 12 hours of dependable use. (With the
Squelch control in "closed" position.)
Before using the SportCat for the first time, or whenever
the LOW BATTERY Indicator appears on the LCD display,
you should fully charge the Battery Pack.
Note: When the Battery Pack is low, the Low Battery
Indicator will start to blink. After about 10 minutes, the
scanner will shut itself off to prevent the battery from
becoming completely discharged.
Before charging, you must first install the Battery Pack
according to the steps below.

Installing the Battery Pack

1.
Open the cover.
2.
Insert the battery pack.
3.
Replace cover and press
down until it clicks into
place.

Setup

15