Uniden SC200 Operating Manual page 48

2.
Determine the scanner that has the frequency data that
you want to transfer. This one must be set up as the
"Master Unit", and the other must be set as the "Slave
Unit".
3.
On the scanner that is the" Master Unit", press the
or
4.
On the scanner that is the" Slave Unit", press the
or
5.
Press the
transfer is started from the Master Unit to the Slave Unit.
During the data transfer,
will continue to flash.
When the data transfer is completed,
If the data transfer is not successful, the following error
message will appear.
key until
key until
key on both scanners. The data
46
appears in the display.
appears in the display.
and characters
displays.