Uniden SC200 Operating Manual page 16

13. Press
automatic 2-second delay during scanning or searching
for active frequencies. (When delay is activated, DELAY
appears on the display.) In this mode, when the
scanner monitors an active frequency, searching or
scanning will not resume until transmission stops for 2
seconds.
Press and hold
on the display. This disables the keypad and VFO
control and prevents any accidental key entries. To
enable the keypad, press and hold
until
14. While Scanning, press
PRIORITY SCAN function. (PRIORITY appears on the
display.) While Searching, press
toggle between 100 steps and 300 steps per second.
(When in TURBO SEARCH is activated. SEARCH
flashes on the display.)
15. Press
Press and hold
search on/off.
16. Press
Press and hold
scanner turn the LCD Back Light on when a
transmission is found (Auto Light function).
/ KEYLOCK to turn ON or OFF the
/ KEYLOCK until
disappears from the display.
to turn the Subaudible tone Mode on/off.
to turn the Subaudible tone
to turn the LCD Back light on and off.
for 2 seconds to make the
/ TURBO to activate the
14
appears
/KEYLOCK
/ TURBO to