Weather Channel Scanning - Uniden SC200 Operating Manual

Weather Channel Scanning

The SportCat is designed to search for your local NOAA
and Canada weather channel(s) from 10 preprogrammed
NOAA and Canada channels.
1.
Press
the lower side of the display and the word SCAN moves
across the display.
2.
When the Weather scan finds an active channel in your
area, the scanner stops at that frequency.
3.
To stay at that frequency, press
To resume Weather scan, press
It is possible for you to hear more than one Weather
broadcast in your area. If the broadcast sounds weak and
distant, press
Or, press
4.
To exit Weather Mode, press
/ BAND .
Note:
All weather channels transmit continuous
broadcasts. Once the Weather scan stops on a
transmission, it will remain on that channel. Weather scan
will not resume automatically. You must press
ATT
/
In some parts of the country, you may not be able to
monitor weather broadcasts, such as in low-lying areas.
Normally a higher location will improve the reception.
/ ATT to begin Weather scan. WX appears at
/ ATT again to look for a closer station.
or
again to reactivate scanning.
to move to another station.
26
or .
/ ATT .
, or