Furuno DSC-60 Service Manual page 6

Chapter 4 System settings
1. Setup of MMSI and Method of Default Setting of EEROM
1.1 Setup of MMSI ---------------------------------------------------------------------- 4-1
1.2 Default setting of EEROM ------------------------------------------------------- 4-2
2. System setup
2.1 Outline of the setup --------------------------------------------------------------- 4-3
2.2 Alarm setup -------------------------------------------------------------------------- 4-5
2.3 Auto ack setup ---------------------------------------------------------------------- 4-7
2.4 Position setup ----------------------------------------------------------------------- 4-8
2.5 Print out setup ---------------------------------------------------------------------- 4-9
2.6 User channel entry ---------------------------------------------------------------- 4-10
2.7 Scan freq. setup -------------------------------------------------------------------- 4-11
2.8 Volume setup ------------------------------------------------------------------------ 4-13
2.9 System setup ----------------------------------------------------------------------- 4-14
3. Setting DIP Switches
3.1 Outline of the settings on CONTROL/MODEM board ------------------- 4-17
3.2 Setting for the connection with FS-75/1562/5000 and DP-6 ----------- 4-18
3.3 Setting for the connection with navigational aids ------------------------- 4-19
3.4 Setting for the connection with DMC, IC-302 and PC ------------------- 4-20
3.5 Setting the receiver board ------------------------------------------------------- 4-21
4. Setup menu list ----------------------------------------------------- 4-22
Chapter 5 Test function
1. Overview ------------------------------------------------------------- 5-1
2. Daily Test
2.1 Procedures -------------------------------------------------------------------------- 5-2
2.2 Details about the daily test ------------------------------------------------------ 5-3
3. Test through the Setup Menu
3.1 On-board test ----------------------------------------------------------------------- 5-5
3.2 Factory tests (require test instrument) --------------------------------------- 5-9
Chapter 6 Measurement
1. General
2. Measurements
2.1 Measuring tone frequency ------------------------------------------------------- 6-1
2.2 Frequency and power measurement ----------------------------------------- 6-3
ii
Table of Contents