Furuno DSC-60 Service Manual page 27

Priority in communication Priority in communication Priority in communication
Priority in communication Priority in communication
The DSC distress alarm takes the highest priority, and it is generated in any condition whenever the
[DISTRESS] button is pressed for more than three seconds.
Order of priority of remote control by telephone from the DSC and the MF/HF radiotelephone depends
on the system setting for the MF/HF radiotelephone.
F F F F F or r or ref ef ef ef efer er er er erence) or r or r or r ence) ence) ence) ence)
1) When connecting FS-75/2550/1562 (Ver.07 and after) with DSC-60
2182kHz priority setting/System setting 9928:
2) When connecting FS-2500/5000/8000 with DSC-60
Note: DSC-60 is connected to the main unit controller, FS-5000C.
CONTROL/MODEM board: POWER ON CONTROL/MODEM board: POWER ON
CONTROL/MODEM board: POWER ON CONTROL/MODEM board: POWER ON CONTROL/MODEM board: POWER ON
If the POWER ON line of the DSC-60 is connected to FS-75/2550/1562/5000/8000, the radiotelephone
can be turned on and off with the power switch of the DSC-60.That is, the radiotelephone cannot be
turned off when the DSC-60 is on. The advantage of the connection is that a distress alert can be trans-
mitted by the operation only on the DSC-60. This connection has more advantage especially when the
DSC remote control function is used.
Note that the function is limmited according to software and TX/RX board of the in the Note that the function is limmited according to software and TX/RX board of the in the
Note that the function is limmited according to software and TX/RX board of the in the Note that the function is limmited according to software and TX/RX board of the in the Note that the function is limmited according to software and TX/RX board of the in the
FS-75/2550/1562 as below w w w w . . . . . FS-75/2550/1562 as belo FS-75/2550/1562 as belo
FS-75/2550/1562 as belo FS-75/2550/1562 as belo
TX/RX PCB Ver:
05P0526-44 and after
05P0526-33 and before
0: Main unit takes priority.
1: Remote control takes priority. (Select this noramlly.)
Priority
0
1 DSC distress alert
2 2182kHz(Main unit)
3 DSC other than distress
4 Reomte TEL(DSC)
5 NBDP
6 Main unit
Priority
1 DSC distress alert
2 2182kHz(Main unit)
3 DSC other than distress
4 Remote TEL(DSC)
5
6
Program Ver:
Ver 107 and after
Ver 106 and before
Ver 107 and after
Ver 106A
3. Function and overview of each board
Setting of 9928
DSC distress alert
DSC other than distress
Reomte TEL(DSC)
NBDP
2182kHz(Main unit)
Main unit
(No remote control function
Items
like FS-1562.)
NBDP
Main unit
Remarks
Remote station capabiliy
POWER ON line
Remote station capabiliy
POWER ON line
Remote station capabiliy
POWER ON line
Remote station capabiliy
POWER ON line
2-17
1
Yes
available
Yes
not available
not available
not available
Yes
not available