Furuno DSC-60 Service Manual page 4

2. Chacking after installation
First, do the followings: First, do the followings:
First, do the followings: First, do the followings: First, do the followings:
1. Check for secure connections.
2. Check power supply voltage 21V to 31V.
3. Find MMSI No. of the ship, check the specification of the DSC, MF or MF/HF, and check
the remote station function setting, ON or OFF.
Check all the settings. Check all the settings. Check all the settings.
Check all the settings. Check all the settings.
There are two kinds of settings: one is made through [#SETUP] menu and the other is made with DIP
switches. Refer to Page 4-4 and 4-17.
1. All the daily test results are OK? Refer to [DAILY TEST] on Page 5-2.
2. MMSI No. is set correctly? Refer to [System setup] on Page 4-14.
3. The position data on DSC stanby screen are entered correctly? Refer to [Position setup] on
Page 4-8 and [Setting for connection with navigational aids] on Page 4-19.
Check transmitting power of the radiotelephone for rated value. Check transmitting power of the radiotelephone for rated value. Check transmitting power of the radiotelephone for rated value. Check transmitting power of the radiotelephone for rated value. Check transmitting power of the radiotelephone for rated value.
1.The transmitting power of the MF/HF radiotelephone with DSC is the specified value?
Refer to [Frequency and power measurement] on Page 6-3.
2.In the case of remote-station specification, the transmitting power of the MF/HF radiotele-
phone with hand set is the specified value?
3.Actual DSC transmission test result of the MF/HF radiotelephone is OK? Make the test call
"CALL TYPE" to coast radio stations using [TEST CALL].
Explana Explana tions to user tions to user
Explana Explana Explanations to user tions to user tions to users ha
If any malfunction occurs, turn off the power for a time to clear RAM If any malfunction occurs, turn off the power for a time to clear RAM
If any malfunction occurs, turn off the power for a time to clear RAM If any malfunction occurs, turn off the power for a time to clear RAM If any malfunction occurs, turn off the power for a time to clear RAM
memor memory y y y y . No memor memor . No memory bac . No memor . No memor
memor memor . No memor
s ha s hav v v v v e been made thor s ha e been made thor e been made thor
s ha e been made thor e been made thoroughl
y bac y backup ba y bac kup ba kup batter kup ba tter ttery is used in the DSC-60. tter
y bac kup ba tter
oughl oughly? y? y? y? y? oughl
oughl
y is used in the DSC-60. y is used in the DSC-60. y is used in the DSC-60.
y is used in the DSC-60.
2
General