Auto Ack Setup - Furuno DSC-60 Service Manual

2.3 Auto ack setup

This item sets AUTO ACK response.
Pressing [#/SETUP] key reveals "Setup menu" screen. Select AUTO ACK, and press [ENT] key.
Then, the following "Auto ack setup" screen appears.
1. COMPLY Y Y Y Y TYPE (Def 1. COMPL 1. COMPL TYPE (Def TYPE (Def
1. COMPL 1. COMPL TYPE (Def TYPE (Default setting:
Usually, set this item at "ABLE".
This item sets the automatic response AUTO ACK at ABLE or UNABLE. When the request call of
INDIVIDUAL, PSTN, POSITION, or POLLING is received, ABLE accepts the request call and
UNABLE does not accept.
The automatic response AUTO ACK is switched to AUTO or MANUAL with [ACK/5/JKL] key.
Note) No AUTO ACK takes place :
- Receiving message is an error: ECC ERROR,
- The handset is in OFF HOOK,
- Request call of POSITION or POLLING is received when UNABLE is set.
2. UNABLE REASON (Default setting: NO REASON) 2. UNABLE REASON (Default setting: NO REASON)
2. UNABLE REASON (Default setting: NO REASON) 2. UNABLE REASON (Default setting: NO REASON) 2. UNABLE REASON (Default setting: NO REASON)
This setting is enabled when the above COMPLY TYPE setting is set at UNABLE. A reason of
UNABLE is selected.
3. POSITION CALL (Default setting: ON) 3. POSITION CALL (Default setting: ON)
3. POSITION CALL (Default setting: ON) 3. POSITION CALL (Default setting: ON) 3. POSITION CALL (Default setting: ON)
This item sets the type of response to the call from the other party on requesting the ship position.
Refer to the Table below.
4. POLLING CALL (Default setting: ON) 4. POLLING CALL (Default setting: ON) 4. POLLING CALL (Default setting: ON)
4. POLLING CALL (Default setting: ON) 4. POLLING CALL (Default setting: ON)
This item sets the type of response to the call from the other party on requesting the answer about
whether the ship is staying in possible communication range or not. In this case the repsonse does
not include the information of ship position. Refer to the Table below.
* * Auto ack setup * *
COMPLY TYPE : ABLE
UNABLE REASON :
NO REASON GIVEN
POSITION CALL : ON
POLLING CALL : ON
ault setting: ault setting: ABLE) ABLE)
ault setting: ault setting: ABLE) ABLE) ABLE)
Setting
ON
Position Call
OFF
ON
Polling Call
OFF
ABLE
UNABLE
NO REASON
BUSY
EQUIP DISABLED
MODE NOT USABLE
CH NOT USABLE
ON
OFF
Auto Ack
Auto
Manual
Able Unable
Yes No No
No No No
Yes No No
No No No
4-7
2. System setup(AUOT ACK)