Initial Setup - Furuno FA-40 Operator's Manual

2.5

Initial Setup

You can use the FA-40 without changing the settings for [Initial Setup]. If changing the
settings, refer to the followings:
Most of the menu items are the same between the PC and external display. For de-
tails, see "MENU TREE" on page AP-1.
Menu item
[AIS Status] (for the ex-
ternal display)
[Status] (for the PC)
[SART Test RX]
[Ship Static]
[MMSI]
[Ship Name]
[Call Sign]
[Ship Type]
[Cargo Type]
[Serial Number]
[Antenna Position]
For the PC, click [Apply] or [Apply All] to confirm the settings.
[Status] ([AIS Status] on the external display), [MMSI], and [Serial Number]:
Display only.
[Initial Setup] menu for PC
Shows the status of AIS.
Select whether to receive an AIS SART test message.
Shows the MMSI number.
Enter the ship's name, using up to 20 alphanumeric characters.
Enter the call sign, using seven alphanumeric characters.
Select the ship type.
Select the cargo type. Available options depend on the setting of [Ship
Type].
Shows the serial number for the equipment.
Set the antenna position referring to the following figure.
2. SHIP INFORMATION INPUT
Description
A: Distance from bow to GPS
antenna position
(setting range: 0 to 511 m)
B: Distance from stern to GPS
antenna position
(setting range: 0 to 511 m)
C: Distance from port to GPS
antenna position
(setting range: 0 to 63 m)
D: Distance from starboard to
GPS antenna position
(setting range: 0 to 63 m)
2-5