Assemble Your Linea Pro; Charge Your Linea Pro - Infinite Peripherals Linea Pro 6 User Manual

USER MANUAL — LINEA PRO 6

Assemble Your Linea Pro 6

1. Remove the top cover of the Linea Pro 6 case.
2. Slide the iOS device onto the Lightning™ connector and ensure it is seated firmly.
3. Guide the top piece onto the Linea Pro 6 using the large snap
4. Press the top piece onto the body of the unit.
5. Ensure the top piece is securely in place using the Torx screw provided.

Charge Your Linea Pro 6

The Linea Pro 6 uses a Lithium-ion rechargeable battery, which must be fully charged before first use and supports pass through charging to the iOS device.
The iPhone and Linea Pro 6 may be charged together via the mini USB port or by placing it in a Linea Pro 6 Single or 5-Unit Charging Station.
The battery should be charged in an ambient operating temperature of 0°C to +40°C. Charging time for a fully drained battery is approximately 5h and
30 min to achieve full charge status. If the device is equipped with encrypted magnetic stripe reader, do not allow the battery to fully discharge. The unit
disconnects from the iPhone when the battery is drained below 3.6V.
Note:
• Due to current charging limitations, the Linea Pro 6 should not
be charged via USB from a Windows or Mac connection.
• To prevent electrical damage to the Linea Pro 6 and/or battery,
please use approved USB to mini USB cables only.
USB Sync/Charge Port
8