Putting The Machine Out Of Service; Disconnecting The Machine; Machine Liquidation - Primus MB 90 Installation And Maintenance Manual

www.groupdynamics-laundry.com
sales@groupdynamics.lv

8. PUTTING THE MACHINE OUT OF SERVICE

If the machine is out of service, possibly moved, follow these instructions.

8.1. DISCONNECTING THE MACHINE

1. Switch off the external electric power inlet to the machine.
2. Turn off the main switch located on the electro distributor door.
3. Shut the external water, compressed air or steam inlet to the machine.
4. Make sure that the external electric power, compressed air or steam inlets are shut off.
Disconnect all electric, water, compressed air and steam inlets.
5. Insulate the external electric power inlet disconnected conductors.
6. Equip the machine with a sign „OUT OF SERVICE".
7. Unscrew nuts (bolts) fixing the machine to the floor.
8. During transportation follow the instructions stated in chapters „2. Warnings and symbols", paragraphs
„Transportation and storage" and chapter „4.1. Handling, transportation and storage".

8.2. MACHINE LIQUIDATION

For the machine liquidation after finishing its usage period, respect the following instructions :
8.2.1. POSSIBILITY OF THE MACHINE LIQUIDATION BY THE SPECIALIZED COMPANY
Machine liquidation is executed by the competent company which respects material sorting and conditions for
the waste liquidation.
8.2.2. POSSIBILITY OF THE MACHINE LIQUIDATION BY OWN POTENTIAL
It is necessary to divide material into the following groups :
1. Plates of printed circuits incl. LCD ........................................................... waste group 160215
2. Electrolytic capacitors ............................................................................. waste group 160215
3. Cabling ................................................................................................... waste group 160216
4. Other electrical components; motor, frequency converter,
contactors, heating elements.................................................................. waste group 160216
5. Plastics ................................................................................................... waste group 191204
6. Rubber.................................................................................................... waste group 191204
7. Metal ...................................................................................................... waste group 160117
8. Hubs with bearings.................................................................................. waste group 170410
Offer the sorted waste to the company which is competent for further treatment.
NOTES:
513289 PUBLICATION DATE 07/04 INSTALLATION AND MAINTENANCE MANUAL 29